ABB SH201-C20 1-Pole 20A 6kA Type C MCB
The SH201-C20 is a 1-pole 20A Type C miniature circuit breaker with 6kA breaking capacity from the ABB SH200 Compact Home series. Combining a delayed thermal tripping mechanism for overload protection with an electromechanical mechanism for short-circuit protection, it is a current-limiting choice for general lighting and power circuits in UAE residential and commercial distribution boards.
Key Features
- 1-pole 20A Type C MCB suitable for general lighting and power circuit protection
- 6kA breaking capacity at 230/400V AC for standard UAE residential and commercial fault levels
- Dual tripping mechanism — delayed thermal for overload, electromechanical for short-circuit protection
- Current-limiting design complying with IEC/EN 60898-1 for residential applications
- Genuine ABB SH200 series quality — consistent performance and reliability
Technical Specifications
| Specification |
Details |
| Brand |
ABB |
| Model |
SH201-C20 |
| Rated Current |
20A |
| Poles |
1 |
| Tripping Characteristic |
Type C |
| Breaking Capacity |
6kA |
| Voltage |
230V AC |
| Mounting |
DIN Rail |
Applications
- General lighting and power circuit protection in residential distribution boards
- Socket outlet circuit protection in commercial and residential installations across the UAE
- Small to medium appliance circuit protection in consumer units
- Distribution board MCB replacement for standard lighting and power sub-circuits
FAQ
-
What's the difference between an MCB and an RCCB/RCD?
An MCB (miniature circuit breaker) protects wiring and connected equipment against overload and short-circuit current. An RCCB/RCD protects against earth leakage by monitoring current imbalance. The two are complementary and are normally installed together in a distribution board.
-
What does the 6kA breaking capacity mean?
6kA is the maximum fault current this MCB can safely interrupt without damage. It should be equal to or higher than the prospective fault current at its installation point in the board.
-
Is this MCB compatible with other ABB DIN-rail distribution boards?
Yes — it's a standard DIN-rail (EN 60715) mounted breaker and clips directly into ABB's modular consumer units and distribution boards alongside other ABB DIN-rail devices.
-
Can I install this myself?
No. This is a distribution board component and must be installed and connected by a licensed electrician in accordance with UAE wiring regulations — it is not a DIY consumer product.
